Henan Hongze Environmental Protection Technology Co., Ltd
Polyacrylamide has a good viscosity, has a thickening effect, in Food Additives production can not use the product thickening that? To answer this question, start with the toxicity of polyacrylamide. Polyacrylamide itself is basically not toxic, after it enters the human body, most of it is discharged in the short term, rarely absorbed by the human body, but the raw material of the production of the product acrylamide is toxic, it is difficult to completely transform in the production, the...
◆ Before the formal use of a type of polyacrylamide product, Water Treatment Chemicals, a small test should be carried out to determine the best dosage and conditions of use, when used as a flocculant, the general dosage is 0.1 ~ 0.5ppm. ◆ Polyacrylamide products must be dissolved into a solution before use, so that the polymer chain is fully extended for reserve use. Usually non-ionic and cationic products are diluted to about 0.1%, and the dissolution operation is carried out in a mixing tank...
As a non-renewable energy source, petroleum reserves in the ground are very limited. Under the current water flooding conditions, the oil recovery rate is only 35% to 45%, that is, most of the crude oil remains in the ground after the end of water flooding. How to extract the remaining crude Oilfield Chemicals in the ground to the maximum extent has become an important task for the petroleum industry. "Developing the west and stabilizing the east" is the development strategy of China's...
70% of the earth is water and 30% is land. Water is everywhere in People's Daily life. Industry and agriculture require a large amount of water resources. However, with the development of industry and the progress of human beings, our water resources are also seriously polluted. Although the proportion of water is 70%, how much water is drinkable, Water Treatment Chemicals, and even the drinkable water needs to be treated. Polyacrylamide in Water Treatment Chemicals has many advantages,...
The advantages of organic flocculants such as polyacrylamide are relatively economical and simple to use, but the disadvantages are large dosage, low flocculation effect, and high cost and strong corrosion. So how can it be used economically and effectively? This problem has been plaguing the majority of customers, Noel biology from the customer's point of view, in-depth study of this problem. Flocculant is undoubtedly the most critical factor in the entire process of sewage treatment, and it...
polyacrylamide, It has an irreplaceable role in the oil displacement process in tertiary oil recovery, and as Oilfield Chemicals, a Drilling Auxiliaries fluid, it mainly has the following functions: 1) Good water solubility Polyacrylamide is easily soluble in water, mostly in the form of aqueous solutions, the formation of hydrogen bonds between water molecules and the polar side groups of polyacrylamide, can be dissolved in water in various percentages. 2) Rheology Rheology is the...
As we all know, polyacrylamide is a universal additive, has a wide range of applications in many industries, mainly used as Water Treatment Chemicals in industrial production, can be used as additives in feed processing, can play the role of oil displacement in Oilfield Chemicals, in geological exploration can play the role of lubricating drill waterproof solid wall. Polyacrylamide is also used in the production of dish soap, what role does it play in the production of dish soap? Polyacrylamide...
One of the factors hindering the development of textile printing and dyeing industry is environmental protection issues, and wastewater treatment is the main problem of environmental protection issues, statistics in 2008, textile wastewater emissions accounted for 10.6% of the national wastewater emissions, emissions 2.3 billion tons, ranking third in industrial emissions, COD emissions of 3.14 billion tons, ranking fourth in industrial emissions. Accounting for 7.76% of the national industrial...
Gelatin is widely used, but wastewater from gelatin production still needs to be treated. According to the gelatin production method, we know that gelatin is mainly produced by alkali method, which produces a large amount of Water Treatment Chemicals in the production process, and the wastewater is high in alkali, high in calcium, high in chlorine, high in COD characteristics, complex water quality and large amount of water. Because gelatin wastewater has such characteristics, the treatment of...
With the improvement of people's living conditions, there are higher requirements for material life, and there is more demand for leather. It also drives the rapid development of leather processing industry in our country. While the development of the leather industry promotes employment and improves people, it also causes a lot of pollution to the environment, especially water pollution. For the sustainable and healthy development of enterprises, Water Treatment Chemicals is a top priority....
The upstream raw materials of polyacrylamide are generally petroleum products (such as DAC, acrylonitrile, propylene chloride, etc.), Water Treatment Chemicals，and the price of oil itself is relatively large, so it is affected by the price of basic chemical products such as petroleum. The following figure shows the structure of the polyacrylamide industry chain Polyacrylamide upstream and downstream industry chain diagram Polyacrylamide upstream and downstream industry chain diagram (Structure...
Polyacrylamide is an organic polymer, which is widely used in oil exploitation, Water Treatment Chemicals, mineral processing, Oilfield Chemicals，paper making and other fields. Polyacrylamide is formed by polymerization of acrylamide monomer. Therefore, the importance of acrylamide production in the polyacrylamide production process is self-evident. Polyacrylamide monomer acrylamide production technology, no matter which production method, their raw materials are acrylonitrile, hydrated under...
Polyacrylamide，Polymerized Ferrous Sulfate aqueous solution polymerization is the main method used in industrial production Water Treatment Chemicals. The monomer solution in the formulation must be purified by ion exchange. The reaction medium water should be deionized water, and the initiator mainly uses the oxidation-reduction initiator system composed of persulfate and sulfite to reduce the reaction initiation temperature. In addition, a chain transfer agent is needed, and isopropyl alcohol...
Molecular weight of PAM The molecular weight of polyacrylamide mainly refers to the length of the molecular chain, the higher the molecular weight, the longer the polymer chain, the greater the viscosity of the polyacrylamide solution, and the greater the resistance in the solution. It should be noted that it is not the larger the molecular weight and the thicker the product, the better the effect, the actual situation is the need to determine its effect according to the wastewater experiment....
Coal, as the so-called industrial food, plays an indispensable role in the development of the national economy. Affected by the development of new energy technologies and economic development and policies, in recent years, the growth of coal consumption as an energy source has slowed down, but the production and consumption are still at a historical high, and the production and sales are still very large. Whether in the process of production or use, coal carbon will produce a mixture of water...
In the field of water treatment, the application effect of polyaluminum chloride is also directly determines the effluent effect, we all know that in addition to the quality of polyaluminum chloride itself there are many external factors affected, so what are these external factors? The following polyaluminum chloride manufacturers to answer for you: 1, water quality/sludge properties (selection); Whether it is used for wastewater treatment or other industrial purposes, what needs to be done...
Summer is a relatively dry season, but this summer more rainy season, every three and a half to a heavy rain, or say under, the weather after the rain is not necessarily cool, humidity with a point of hot, and the state of polyaluminum chloride is powdering, exposed to the air is very easy to dissolve, especially now the hot and humid environment, the dissolution rate of polyaluminum chloride will be affected by moisture, What if the polyaluminum chloride dissolves? Can I still use it? When the...
Drum type polyaluminum chloride aluminum content is general, water insoluble matter is high, mostly used for sewage treatment, the production process is roughly: liquid raw materials - natural precipitation - drum drying - finished products. The polyaluminum chloride content produced by this method is about 26hl, and the water insoluble matter is 3, and the polyaluminum chloride content of some manufacturers is less than 25, the main step is natural precipitation, and many manufacturers have...
The use of polyaluminum chloride in sewage treatment, it is mainly a solid object of yellow or yellowish brown powder, water treatment with flocculation, suitable for printing and dyeing factory, paper factory, tannery agent food factory and other industries water treatment, also has the effect of phosphorus removal, can be precipitated with phosphoric acid in wastewater, suitable for domestic sewage plant phosphorus removal. The use of polyaluminum chloride in sewage treatment is generally...
Due to the advantages of spray drying, such as good stability, wide water area, fast hydrolysis rate, strong adsorption capacity, large alum formation, fast quality density precipitation, low outlet turbidity and good dehydration performance, the dosage of spray drying polyaluminum chloride is reduced under the same water quality. Especially in the case of poor water quality, the dosage of spray drying products is compared with that of roller drying polyaluminum chloride. It can be reduced by...
Polyferric sulfate (PFS) is also known as basic ferric sulfate or hydroxyl ferric sulfate, and its molecular formula can generally be expressed as [Fe2(OH)n(S04) 3-n / 2]m[2]. It is an intermediate product of the hydrolysis of iron sulfate in a flocculation process. Liquid polyferric sulfate itself contains a large number of polymeric cations, such as [Fe3(0H)4]5+, [Fe6(OH)12]6+, [Fe4(OH)4]6+, which exist in aqueous solution [Fe(H20)6]3+, [Fe2(H20)3]3+, [Fe(H20)2]3+ and so on. As a new type of...
A water purifier is a chemical or substance used to treat and purify water. They are mainly of the following types: 1. Disinfectant: such as chlorine, ozone, ultraviolet, etc., can kill bacteria, viruses and other microorganisms in water. 2. Flocculants: such as aluminum sulfate, polyaluminum chloride, etc., can remove suspended particles and colloidal substances in water. 3. Adsorbents: such as activated carbon, ion exchange resin, etc., can remove pollutants such as organic matter and heavy...
In modern water treatment and environmental protection industry, polyaluminum chloride (PAC) as a highly efficient flocculant, its performance directly affects the improvement of water quality and the efficiency of wastewater treatment. Among them, basicity, as one of the important indicators to measure the effect of PAC, is very important to improve the flocculation effect of PAC. Based on the material text provided, this paper will discuss how to improve the basicity of polyaluminum chloride...
Classification of polyaluminum chloride As an inorganic polymer coagulant, Polyaluminum Chloride (PAC) has been widely used in many fields such as water treatment and industrial manufacturing. It is classified in various ways, mainly including the following: Classification by form: Liquid polyaluminum chloride: undried form, easy to use, no dilution, but high transport costs, suitable for short-distance transport. Solid polyaluminum chloride: dried form, easy to transport, but need to be...
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.